Preparatory programme
Dutch-taught Master of Electromechanical Engineering Technology
2024-2025
Programme for Masters of Nautical Sciences
47 ECTS-credits
2-CAD 3D Design
Course code:
1305FTICAD
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Automation: Signals, Logic and Sensors (1327FTIBSL) or is enrolled in a bridging/preparatory programme.
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
3-Design and Production Techniques
Course code:
1310FTIOPR
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme.
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
- Ivan Verhaert
- Stef Jacobs
- Houssam Matbouli
- Dries Van Cauteren
- Jitse Van Thillo
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a bridging/preparatory programme.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a bridging/preparatory programme.
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Heat Transfer (1328FTIWAL) and 4-Climate control: HVAC-concepts (1316FTICON) or is registered in a bridging/preparatory programme.
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Materials Science
Course code:
1318FTIMAT
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
2023-2024
Programme for Masters of Nautical Sciences
47 ECTS-credits
2-CAD 3D Design
Course code:
1305FTICAD
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Automation: Signals, Logic and Sensors (1306FTIFLM) or is enrolled in a bridging/preparatory programme AND The student must enroll for 3-4 Automation: PLC's (1330FTIBTP and 1311FTIBPL) at the same time.
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Marc Martens
3-Design and Production Techniques
Course code:
1310FTIOPR
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme.
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
- Ivan Verhaert
- Stef Jacobs
- Houssam Matbouli
- Dries Van Cauteren
- Jitse Van Thillo
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a bridging/preparatory programme.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a bridging/preparatory programme.
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Materials Science
Course code:
1318FTIMAT
Semester:
1E SEM
Contact hours:
46
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Heat Transfer (1328FTIWAL) AND is/has been registered for for 4-Climate control: HVAC-concepts (1316FTICON) or is enrolled in a bridging/preparatory programme.
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
2022-2023
Programme for Masters of Nautical Sciences
51 ECTS
51 ECTS
2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Steven Lenssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has passed 2-Automation: Signals, Logic and Sensors (1306FTIFLM) or is enrolled in a preparatory programme
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Marc Martens
3-Design and Production Techniques
Course code:
1309FTIOPR
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Erwin Smet
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Eric Lenssen
- Erwin Smet
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
- Ivan Verhaert
- Jan Van de Paer
- Stef Jacobs
- Houssam Matbouli
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a preparatory programme
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a preparatory programme
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Patrik Cools
- Patrik Cools
- Augustinus De Winter
- Theodore Van Oers
5-Strength of Advanced Materials
Course code:
1318FTISVG
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Sam Van der Jeught
- Jean-Pierre Smet
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
40
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Erwin Smet
- Eric Lenssen
- Michaël Hillen
- Steven Lenssen
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student has passed 2-Heat Transfer (1328FTIWAL) AND must enroll for 4-Climate control: HVAC-concepts (1316FTICON) or is enrolled in a preparatory programme
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
2021-2022
Programme for Masters of Nautical Sciences
No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.
51 ECTS-credits
2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Izaak Van Crombrugge
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Eric Lenssen
- Jean-Pierre Smet
- Jolan Vanderstuyf
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
- Jan Van de Paer
- Anna Pykhtina
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS)
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Patrik Cools
- Augustinus De Winter
- Theodore Van Oers
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Erwin Smet
- Jean-Pierre Smet
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Erwin Smet
- Michaël Hillen
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student must enroll for 4-Climate control: HVAC-concepts (1316FTICON)
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Ivan Verhaert
- Jan Van de Paer
2020-2021
Programme for Masters of Nautical Sciences
No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.
51 ECTS-credits
2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Walter Vanhoeylandt
- Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Izaak Van Crombrugge
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Eric Lenssen
- Jean-Pierre Smet
- Jolan Vanderstuyf
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
- Jan Van de Paer
- Freek Van Riet
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS)
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Patrik Cools
- Augustinus De Winter
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Erwin Smet
- Jean-Pierre Smet
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
- Erwin Smet
- Michaël Hillen
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student must enroll for 4-Climate control: HVAC-concepts (1316FTICON)
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Ivan Verhaert
- Sandy Jorens
- Jan Van de Paer
2019-2020
Programme for Masters of Nautical Sciences
No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.
48 ECTS-credits
S1-Operating Techniques and Automotive
Course code:
5011FTISBA
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Dominique Daens
- Daniël Keersmaekers
S1-Elektro Techniques
Course code:
5020FTIELT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Patrik Cools
S1-Energy
Course code:
5021FTIENE
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Ivan Verhaert
- Eddy Janssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Walter Vanhoeylandt
- Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Walter Janssens
- Eric Lenssen
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Emiel Billiet
- Eric Lenssen
- Jean-Pierre Smet
- Jolan Vanderstuyf
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
- Gunther Steenackers
- Erwin Smet
- Jean-Pierre Smet
2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
- Eric Lenssen
S2-Automotive and Electrotechnical systems
Course code:
5018FTISAE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Patrik Cools
- Joachim Denil
S2-CAD 3D design and simulations
Course code:
5012FTISCA
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
- Walter Janssens
- Eric Lenssen
- Erwin Smet
S2-Elektro Techniques
Course code:
5022FTIELK
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Eddy Janssen
S2-Energy
Course code:
5023FTIENG
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Ivan Verhaert
- Eddy Janssen