Courses open to exchange students
Only a number of courses of our Bachelor and Master programmes are taught in English to accommodate international students. In the list here below you can see which courses are available for exchange students.
Some explanations:
- 1E SEM: fall semester or winter semester (September - January)
- 2E SEM: spring semester or summer semester (February - August)
- study point: credit. The study points or credits give you a good idea of the time you will spend on your programme and on each course unit. Per credit you should count on 25 to 30 hours of studying, taking classes, and taking exams.
2024-2025
Exchange courses at the Faculty of Applied Engineering
Common Courses
Common Courses
4-English
Course code:
1033FTIENG
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-English (1032FTIENG).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
4-French
Course code:
1030FTIFRA
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-French (1029FTIFRA).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-English (1033FTIENG).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-French (1030FTIFRA).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Communication in Engineering Innovations
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
Global Justice
Course code:
1001IOBGJU
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Development Aid
Lecturer(s):
Courses in Civil Engineering Technology
Courses in Civil Engineering Technology
2-Construction Details and Building Information Modelling (BIM)
Course code:
1103FTIBIM
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
- Cedric Vuye
- Ali Zain Ul Abadeen
- Ablenya Barros
- Seyed Ali Golmohammadi Tavalaei
- 2 NNB FTI BK
- Qiuya Xiang
6-Bachelor's Project Construction including Internship
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
6-International Internship
Course code:
1097FTIINT
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-Scientific Project (1083FTIWTP or 1089FTISCP) AND 4-Execution Techniques (1108FTIUVT).
Contact hours:
96
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Construction including Internship for Bachelor Students
Course code:
9910FTIBPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
2E SEM
Sequentiality:
The student has been registered for 3-Theory of Strength and Stability (1105FTISTS).
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme.The student must be in diploma year.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
II-Project Construction including Internship for Master Students
Course code:
9910FTIMPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Courses in Biochemical Engineering Technology
Courses in Biochemical Engineering Technology
S3-Instrumental Analysis and Organic Chemistry
Course code:
5004FTIIAO
Semester:
1E SEM
Contact hours:
44
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Biochemistry
Lecturer(s):
5-Instrumental Analysis
Course code:
1727FTIIAN
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Analytical Chemistry (1723FTIANC).
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
5-Organic Chemistry
Course code:
1728FTIORG
Semester:
1E SEM
Sequentiality:
The student is/has been registered for 4-Organic Chemistry (1709FTIORG).
Contact hours:
36
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Gene Technology
Course code:
1903FTIGTE
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Advanced Wastewater Engineering
Course code:
2013FTIAWW
Semester:
1E SEM
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Project Bioprocess Engineering
Course code:
2012FTIPBE
Semester:
1E SEM
Sequentiality:
The student is/has been registered for I-Industrial Biotechnology (2007FTIIBT) and I-I-Biochemical Separation Techniques (2012FTIBST).
Contact hours:
56
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Circular Water
Course code:
2019FTICWA
Semester:
2E SEM
Contact hours:
26
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Biochemistry including Internship for Master Students
Course code:
9900FTIMPB
Semester:
1E/2E SEM
Contact hours:
17
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme + the student must be in diploma year.
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
Courses in Chemical Engineering Technology
Courses in Chemical Engineering Technology
S3-Instrumental Analysis and Organic Chemistry
Course code:
5004FTIIAO
Semester:
1E SEM
Contact hours:
44
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Biochemistry
Lecturer(s):
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
5-Instrumental Analysis
Course code:
1727FTIIAN
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Analytical Chemistry (1723FTIANC).
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
5-Organic Chemistry
Course code:
1728FTIORG
Semester:
1E SEM
Sequentiality:
The student is/has been registered for 4-Organic Chemistry (1709FTIORG).
Contact hours:
36
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Electrochemical Engineering
Course code:
2022FTIELE
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Lab Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Petrochemistry
Course code:
2212FTIPET
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Circular Water
Course code:
2019FTICWA
Semester:
2E SEM
Contact hours:
26
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Digitisation for the Chemical and Process Industries
Course code:
2024FTIDCP
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme + the student must be in diploma year.
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Chemistry including Internship for Master Students
Course code:
9900FTIMPC
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Electronics and ICT Engineering Technology
Courses in Electronics and ICT Engineering Technology
3-Data Structures
Course code:
1535FTIDAT
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Object Oriented Programming (1503FTIOOP) or is registered in a bridging programme.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Sequentiality:
The student is/was registered for 3-Mathematics or is registered in the bridging programme.
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Software Design
Course code:
1534FTISOD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Object Oriented Programming (1503FTIOOP) or is registered in a briding programma.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
5-System Theory
Course code:
1512FTISYS
Semester:
1E SEM
Sequentiality:
The student has been registered in 4-Mathematics (1014FTIWIS).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1088FTISCP or 1084FTIWTP). The student must be in diploma year.
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1088FTISCP or 1084FTIWTP). The student must be in diploma year.
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been registered for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS) AND for 5-System Theory (1512FTISYT) or S2-System Theory (5031FTISEA).
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Project Electronics-ICT including Internship for Bachelor Students
Course code:
9920FTIBPE
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Sequentiality:
The student has been registrered for 4-Teleommunication (1529FTITLC)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Climate Change in a Digital World
Course code:
2221FTIBPE
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Distributed Artificial Intelligence
Course code:
2219FTIDAI
Semester:
1E SEM
Contact hours:
120
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
108
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
Sequentiality:
Enrolment for the master's thesis is only possible if you have graduated from the bachelor's, bridging or preparatory programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme. The student must be in diploma year.
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Project Electronics-ICT including Internship for Master Students
Course code:
9920FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Siegfried Mercelis
- Thomas Huybrechts
- Bavo Lesy
- Alexander Michielsen
Courses in Electromechanical Engineering Technology
Courses in Electromechanical Engineering Technology
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1085FTIWTP or 1087FTISCP) OR the student is registered in a briding or prepatory programme
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1085FTIWTP or 1087FTISCP) OR the student is registered in a briding or prepatory programme
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Electromechanics including Internship for Bachelor Students
Course code:
9930FTIBPE
Semester:
1E/2E SEM
Contact hours:
96
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Energy and Sustainability
Course code:
2323FTIESU
Semester:
1E SEM
Contact hours:
26
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Management
Course code:
2398FTIMAN
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Motion Control
Course code:
2302FTIMCO
Semester:
1E SEM
Sequentiality:
The student has been registered for 5-Electrotechnical Systems: Generators and Drives(1314FTIELK).
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
II-Energy Management
Course code:
2320FTIENM
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme. The student must be in diploma year.
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
I-Mechanical Systems
Course code:
2304FTIMSY
Semester:
1E SEM
Contact hours:
46
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
II-Project Electromechanics including Internship for Master Students
Course code:
9930FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Sustainable Materials
Course code:
2310FTISTM
Semester:
2E SEM
Contact hours:
42
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Thermal System Optimization
Course code:
2324FTITSO
Semester:
2E SEM
Contact hours:
52
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
2023-2024
Exchange courses at the Faculty of Applied Engineering
Common Courses
Common Courses
4-English
Course code:
1033FTIENG
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-English (1032FTIENG).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
4-French
Course code:
1030FTIFRA
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-French (1029FTIFRA).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-English (1033FTIENG).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-French (1030FTIFRA).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Communication in Engineering Innovations
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
Global Justice
Course code:
1001IOBGJU
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Development Aid
Lecturer(s):
Courses in Civil Engineering Technology
Courses in Civil Engineering Technology
4-Scientific Project Construction
Course code:
1089FTISCP
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Academic Skills (1024FTIACV).
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
6-Bachelor's Project Construction including Internship
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
6-International Internship
Course code:
1097FTIINT
Semester:
2E SEM
Sequentiality:
The student has been registered for 4-Scientific Project (1083FTIWTP or 1089FTISCP) AND 4-Execution Techniques (1108FTIUVT).
Contact hours:
96
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Construction including Internship for Bachelor Students
Course code:
9910FTIBPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
2E SEM
Sequentiality:
The student has been registered for 3-Theory of Strength and Stability (1105FTISTS).
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
II-Project Construction including Internship for Master Students
Course code:
9910FTIMPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Courses in Biochemical Engineering Technology
Courses in Biochemical Engineering Technology
S3-Instrumental Analysis and Organic Chemistry
Course code:
5004FTIIAO
Semester:
1E SEM
Contact hours:
44
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Biochemistry
Lecturer(s):
6-Gene Technology
Course code:
1903FTIGTE
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
I-Advanced Wastewater Engineering
Course code:
2013FTIAWW
Semester:
1E SEM
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Project Bioprocess Engineering
Course code:
2012FTIPBE
Semester:
1E SEM
Contact hours:
56
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Biochemistry including Internship for Master Students
Course code:
9900FTIMPB
Semester:
1E/2E SEM
Contact hours:
17
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Biochemistry
Lecturer(s):
Courses in Chemical Engineering Technology
Courses in Chemical Engineering Technology
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
4-Scientific Project Chemistry
Course code:
1086FTISCP
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Academic Skills (1024FTIACV) and has passed 1-Chemistry (1006FTICHE) + has passed 1+2 Fundamentals of Chemistry (1720FTIACH + 1725FTIALC) + has passed 2-Fundamentals of Chemistry lab (1702FTIALA)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
5-Instrumental Analysis
Course code:
1727FTIIAN
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Analytical Chemistry (1723FTIANC).
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
5-Organic Chemistry
Course code:
1728FTIORG
Semester:
1E SEM
Sequentiality:
The student has been registered for 4-Organic Chemistry (1709FTIORG).
Contact hours:
36
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you must be in diploma year AND you must have been registered for 5-Lab Organic Chemistry and Instrumental Analysis (1729FTIPOI) and 4-Scientific Project (1017FTIWTP or 1086FTISCP).
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Design of Experiments and international Study Trip
Course code:
1722FTIDEI
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Electrochemical Engineering
Course code:
2022FTIELE
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Lab Project Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Petrochemistry
Course code:
2212FTIPET
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Reactor Engineering
Course code:
2023FTIARE
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Circular Water
Course code:
2019FTICWA
Semester:
2E SEM
Contact hours:
26
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Chemistry including Internship for Master Students
Course code:
9900FTIMPC
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Electronics and ICT Engineering Technology
Courses in Electronics and ICT Engineering Technology
3-Data Structures
Course code:
1535FTIDAT
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Object Oriented Programming (1503FTIOOP) or is registered in a bridging programme (specific part B)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
4-Scientific Project Electronics-ICT
Course code:
1088FTISCP
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Academic Skills (1024FTIACV).
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Software Design
Course code:
1534FTISOD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Object Oriented Programming (1503FTIOOP).
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
- Ali Anwar
- Jens de Hoog
5-System Theory
Course code:
1512FTISYS
Semester:
1E SEM
Sequentiality:
The student has been registered in 4-Mathematics (1014FTIWIS).
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been registered for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS) AND for 5-System Theory (1512FTISYT) or S2-System Theory (5031FTISEA).
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Project Electronics-ICT including Internship for Bachelor Students
Course code:
9920FTIBPE
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Distributed Artificial Intelligence
Course code:
2219FTIDAI
Semester:
1E SEM
Contact hours:
120
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
108
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Robotics
Course code:
2204FTIROB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
Sequentiality:
Enrolment for the master's thesis is only possible if you have graduated from the bachelor's, bridging or preparatory programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Project Electronics-ICT including Internship for Master Students
Course code:
9920FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Courses in Electromechanical Engineering Technology
Courses in Electromechanical Engineering Technology
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
4-Scientific Project Electromechanics
Course code:
1087FTISCP
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Academic Skills (1024FTIACV).
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1085FTIWTP or 1087FTISCP) OR the student is enrolled in a briding programme
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have been registered for 4-Scientific Project (1085FTIWTP or 1087FTISCP) OR the student is enrolled in a briding programme
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Electromechanics including Internship for Bachelor Students
Course code:
9930FTIBPE
Semester:
1E/2E SEM
Contact hours:
96
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Energy and Sustainability
Course code:
2323FTIESU
Semester:
1E SEM
Contact hours:
26
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Management
Course code:
2398FTIMAN
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Motion Control
Course code:
2302FTIMCO
Semester:
1E SEM
Sequentiality:
The student has been registered for 5-Electrotechnical Systems: Generators and Drives(1314FTIELK).
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
II-Energy Management
Course code:
2320FTIENM
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
I-Mechanical Systems
Course code:
2304FTIMSY
Semester:
1E SEM
Contact hours:
38
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
II-Project Electromechanics including Internship for Master Students
Course code:
9930FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Sustainable Materials
Course code:
2310FTISUM
Semester:
2E SEM
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Thermal System Optimization
Course code:
2324FTITSO
Semester:
2E SEM
Contact hours:
52
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Ivan Verhaert
- Sandy Jorens
- Ilya TJollyn
- Bert Verhasselt
2022-2023
Common Courses
4-English
Course code:
1033FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 2-English (1032FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
4-French
Course code:
1030FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 2-French (1029FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 4-English (1033FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 4-French (1030FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Communication in Engineering Innovations
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
Global justice
Course code:
1001IOBGJU
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Development Aid
Lecturer(s):
Courses in Civil Engineering Technology
Courses in Civil Engineering Technology
4-Scientific Project Construction
Course code:
1089FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed at least 54 ects-credits of model path 1 and has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
6-Bachelor's Project Construction including Internship
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Construction including Internship for Bachelor Students
Course code:
9910FTIBPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
2E SEM
Sequentiality:
The student has passed 3-Theory of Strength and Stability (1105FTISTS)
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Stability
Course code:
2104FTISTA
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
- Serge Vandemeulebroecke
- Johan Blom
- Ben Moins
- Georgios Pipintakos
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
II-Project Construction including Internship for Master Students
Course code:
9910FTIMPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Blended Intensive Program: Civil Engineering
Course code:
9101FTIIWK
Semester:
2E SEM
Contact hours:
75
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
Courses in Biochemical Engineering Technology
Courses in Biochemical Engineering Technology
S3-Instrumental Analysis and Organic Chemistry
Course code:
5004FTIIAO
Semester:
1E SEM
Contact hours:
44
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Biochemistry
Lecturer(s):
6-Gene Technology
Course code:
1903FTIGTE
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
I-Advanced Wastewater Engineering
Course code:
2013FTIAWW
Semester:
1E SEM
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Project Bioprocess Engineering
Course code:
2012FTIPBE
Semester:
1E SEM
Contact hours:
56
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Nils Cop
- Jordi Geerts
- Boris Gilis
II-Project Biochemistry including Internship for Master Students
Course code:
9900FTIMPB
Semester:
1E/2E SEM
Contact hours:
17
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Chemical Engineering Technology
Courses in Chemical Engineering Technology
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
4-Scientific Project Chemistry
Course code:
1086FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed at least 54 ects-credits of model path 1 and has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
5-Instrumental Analysis
Course code:
1727FTIIAN
Semester:
1E SEM
Sequentiality:
The student has passed 3-Analytical Chemistry (1723FTIANC)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
5-Organic Chemistry
Course code:
1728FTIORG
Semester:
1E SEM
Sequentiality:
The student must have been enrolled for 4-Organic Chemistry (1709FTIORG)
Contact hours:
36
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Design of Experiments and international Study Trip
Course code:
1722FTIDEI
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Christophe Vande Velde
- Marina Crols
- Kristin Gysels
- Kristof Verhulst
- Nikolett Wittner
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Thomas Altantzis
I-Lab Project Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Petrochemistry
Course code:
2212FTIPET
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Thomas Altantzis
II-Advanced Reactor Engineering
Course code:
2023FTIARE
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an even year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Circular Water
Course code:
2019FTICWA
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Chemistry including Internship for Master Students
Course code:
9900FTIMPC
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Electronics and ICT Engineering Technology
Courses in Electronics and ICT Engineering Technology
3-Data Structures
Course code:
1535FTIDAT
Semester:
1E SEM
Sequentiality:
The student has passed 2-Object Oriented Programming (1503FTIOOP)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
4-Scientific Project Electronics-ICT
Course code:
1088FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed at least 54 ects-credits of model path 1 and has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
- Ritesh Kumar Singh
5-Software Design
Course code:
1534FTISOD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Object Oriented Programming (1503FTIOOP)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
- Ali Anwar
- Jens de Hoog
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Rafael Berkvens
- Michiel Aernouts
- Rreze Halili
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been enrolled for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS) and for 5-System Theory (1512FTISYT) or S2-System Theory (5031FTISEA)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
6-Project Electronics-ICT including Internship for Bachelor Students
Course code:
9920FTIBPE
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Distributed Artificial Intelligence
Course code:
2219FTIDAI
Semester:
1E SEM
Contact hours:
120
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
108
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
- Mats De Meyer
- Ritesh Kumar Singh
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Robotics
Course code:
2204FTIROB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
Sequentiality:
Enrolment for the master's thesis is only possible if you have graduated from the bachelor's, bridging or preparatory programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Project Electronics-ICT including Internship for Master Students
Course code:
9920FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
Courses in Electromechanical Engineering Technology
Courses in Electromechanical Engineering Technology
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
4-Scientific Project Electromechanics
Course code:
1087FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed at least 54 ects-credits of model path 1 and has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Electromechanics including Internship for Bachelor Students
Course code:
9930FTIBPE
Semester:
1E/2E SEM
Contact hours:
96
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Management
Course code:
2398FTIMAN
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Motion Control
Course code:
2302FTIMCO
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
II-Energy Management
Course code:
2320FTIENM
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Project Electromechanics including Internship for Master Students
Course code:
9930FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Sustainable Materials
Course code:
2310FTISUM
Semester:
2E SEM
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Thermal System Optimization
Course code:
2324FTITSO
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
2021-2022
Common Courses
4-English
Course code:
1033FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 2-English (1032FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
- Li Lin
- Margot Van Dingenen
4-French
Course code:
1030FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 2-French (1029FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 4-English (1033FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
- Li Lin
- Margot Van Dingenen
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 4-French (1030FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Communication in Engineering Innovations
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Business Communication
Lecturer(s):
Global justice
Course code:
1001IOBGJU
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Development Aid
Lecturer(s):
Courses in Civil Engineering Technology
Courses in Civil Engineering Technology
4-Scientific Project Construction
Course code:
1089FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
6-Bachelor's Project Construction including Internship
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Construction including Internship for Bachelor Students
Course code:
9910FTIBPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
2E SEM
Sequentiality:
The student has passed 3-Theory of Strength and Stability (1105FTISTS)
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
II-Project Construction including Internship for Master Students
Course code:
9910FTIMPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Courses in Biochemical Engineering Technology
Courses in Biochemical Engineering Technology
6-Gene Technology
Course code:
1903FTIGTE
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Jan Dries
- Thomas Dobbeleers
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Project Bioprocess Engineering
Course code:
2012FTIPBE
Semester:
1E SEM
Contact hours:
64
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Jordi Geerts
- Nikolett Wittner
II-Advanced Wastewater Engineering
Course code:
2013FTIAWE
Semester:
2E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Jan Dries
- Karina Seguel Suazo
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Jordi Geerts
- Nikolett Wittner
II-Project Biochemistry including Internship for Master Students
Course code:
9900FTIMPB
Semester:
1E/2E SEM
Contact hours:
17
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Chemical Engineering Technology
Courses in Chemical Engineering Technology
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
4-Scientific Project Chemistry
Course code:
1086FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
5-Instrumental Analysis
Course code:
1727FTIIAN
Semester:
1E SEM
Sequentiality:
The student has passed 3-Analytical Chemistry (1723FTIANC)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
5-Organic Chemistry
Course code:
1728FTIORG
Semester:
1E SEM
Sequentiality:
The student must have been enrolled for 4-Organic Chemistry (1709FTIORG)
Contact hours:
36
ECTS-credits:
4 ECTS-credits
Study load (hours):
112
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Design of Experiments and international Study Trip
Course code:
1722FTIDEI
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Christophe Vande Velde
- Marina Crols
- Kristin Gysels
- Kristof Verhulst
- Nikolett Wittner
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Thomas Altantzis
I-Electrochemical Engineering
Course code:
2022FTIEEG
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Pieter Levecque
I-Electrochemistry and Corrosion
Course code:
2021FTIELC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Pieter Levecque
I-Lab Project Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Reactor Engineering
Course code:
2023FTIARE
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an even year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
Contact hours:
17
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Chemistry including Internship for Master Students
Course code:
9900FTIMPC
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses in Electronics and ICT Engineering Technology
Courses in Electronics and ICT Engineering Technology
4-Scientific Project Electronics-ICT
Course code:
1088FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Raf Catthoor
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
5-Software Design
Course code:
1534FTISOD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Object Oriented Programming (1503FTIOOP)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Computer Science
Lecturer(s):
- Ali Anwar
- Jens de Hoog
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
- Michiel Aernouts
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been enrolled for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS) and for 5-System Theory (1512FTISYT) or S2-System Theory (5031FTISEA)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
6-Project Electronics-ICT including Internship for Bachelor Students
Course code:
9920FTIBPE
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
108
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
- Mats De Meyer
- Ritesh Kumar Singh
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Robotics
Course code:
2204FTIROB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
Sequentiality:
Enrolment for the master's thesis is only possible if you have graduated from the bachelor's, bridging or preparatory programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Project Electronics-ICT including Internship for Master Students
Course code:
9920FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
Courses in Electromechanical Engineering Technology
Courses in Electromechanical Engineering Technology
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
4-Scientific Project Electromechanics
Course code:
1087FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
- Christophe Vande Velde
- Bart Ribbens
- Edgar Cardenas
- David Ceulemans
- Marc Martens
- Lei Shi
- Dorine Wambeke
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Electromechanics including Internship for Bachelor Students
Course code:
9930FTIBPE
Semester:
1E/2E SEM
Contact hours:
96
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
I-Motion Control
Course code:
2302FTIMOC
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is only possible after graduating in the bachelor, preparatory or bridging programme
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Project Electromechanics including Internship for Master Students
Course code:
9930FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
2020-2021
Common courses
4-English
Course code:
1033FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 2-English (1032FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
4-French
Course code:
1030FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 2-French (1029FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 4-English (1033FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
- Tom Van Hout
- Margot Van Dingenen
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 4-French (1030FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Communication in Engineering Innovations
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Business Communication
Lecturer(s):
Courses Construction
4-Scientific Project Construction
Course code:
1089FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
5-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
1E SEM
Sequentiality:
The student has passed 3-Theory of Strength and Stability (1105FTISTS)
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction including Internship
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Construction including Internship for Bachelor Students
Course code:
9910FTIBPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
II-Project Construction including Internship for Master Students
Course code:
9910FTIMPC
Semester:
1E/2E SEM
Contact hours:
2
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Courses Biochemistry
5-Gene Technology
Course code:
1903FTIGTE
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Jan Dries
- Thomas Dobbeleers
- Lennert Dockx
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Gene Technology
Course code:
2011FTIGTE
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Jan Dries
- Thomas Dobbeleers
- Lennert Dockx
I-Project Industrial biotechnology
Course code:
9904FTIKOO
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Nikolett Wittner
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Nikolett Wittner
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Project Biochemistry including Internship for Master Students
Course code:
9900FTIMPB
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Wastewater Engineering
Course code:
9972FTIWWE
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
Courses Chemistry
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
4-Scientific Project Chemistry
Course code:
1086FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
5-Organic Chemistry
Course code:
1714FTIORG
Semester:
1E SEM
Sequentiality:
The student must have been enrolled in 4-Organic Chemistry (1709FTIORG)
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Design of Experiments and international Study Trip
Course code:
1722FTIDEI
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Christophe Vande Velde
- Marina Crols
- Kristin Gysels
- Lukasz Pazdur
- Kristof Verhulst
- Marc Wijnants
- Nikolett Wittner
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Chemistry including Internship for Bachelor Students
Course code:
9900FTIBPC
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Lab Project Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Serge Tavernier
- Thomas Altantzis
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Project Chemistry including Internship for Master Students
Course code:
9900FTIMPC
Semester:
1E/2E SEM
Contact hours:
12
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Electrochemical Engineering
Course code:
2013FTIECE
Semester:
2E SEM
Sequentiality:
The student has passed I-Electrochemistry, Corrosion (2003FTIELC) or must enroll for I-Electrochemistry, Corrosion (2003FTIELC)
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an even year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses Electronics-ICT
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Raf Catthoor
4-Scientific Project Electronics-ICT
Course code:
1088FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Stijn Denis
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Stijn Denis
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been enrolled for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS) and for 5-System Theory (1512FTISYT) or S2-System Theory (5031FTISEA)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Johann Marquez-Barja
- Seilendria Ardityarama Hadiwardoyo
- Nina Slamnik-Krijestorac
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
6-Project Electronics-ICT including Internship for Bachelor Students
Course code:
9920FTIBPE
Semester:
1E/2E SEM
Contact hours:
160
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Peter Hellinckx
- Simon Sleutel
- Guido Van Landeghem
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
- Rafael Berkvens
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Joachim Denil
- Koen Lostrie
- Marc Martens
- Izaak Van Crombrugge
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Project Electronics-ICT including Internship for Master Students
Course code:
9920FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
Courses Electromechanics
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
4-Scientific Project Electromechanics
Course code:
1087FTISCP
Semester:
2E SEM
Sequentiality:
The student has passed 2-Academic Skills (1024FTIACV)
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
- Christophe Vande Velde
- Bart Ribbens
- Edgar Cardenas
- David Ceulemans
- Marc Martens
- Lei Shi
- Dorine Wambeke
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Project Electromechanics including Internship for Bachelor Students
Course code:
9930FTIBPE
Semester:
1E/2E SEM
Contact hours:
96
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Vehicle Dynamics
Course code:
2317FTIVDY
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Internal Combustion Engineering
Course code:
2318FTIICE
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Joachim Denil
- Koen Lostrie
- Marc Martens
- Izaak Van Crombrugge
II-Automotive Engineering
Course code:
2307FTIMAE
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Raf Catthoor
II-Automotive Embedded systems
Course code:
2308FTIMAE
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Paul De Meulenaere
- Cosmin Copot
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
II-Project Electromechanics including Internship for Master Students
Course code:
9930FTIMPE
Semester:
1E/2E SEM
ECTS-credits:
30 ECTS-credits
Study load (hours):
840
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
2019-2020
Common courses
6-English
Course code:
1034FTIENG
Semester:
2E SEM
Sequentiality:
The student has passed 4-English (1033FTIENG)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
- Tom Van Hout
- Margot Van Dingenen
6-French
Course code:
1031FTIFRA
Semester:
2E SEM
Sequentiality:
The student has passed 4-French (1030FTIFRA)
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
French
Exam Period:
exam in the 2nd semester
Study domain:
Linguistics and Proficiency
Lecturer(s):
Presentation skills
Course code:
9928FTIPSK
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Faculty decision based on student file
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Business Communication
Lecturer(s):
Courses Construction
4-Scientific Project Construction
Course code:
1089FTISCP
Semester:
2E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
5-Strength of Materials and Stability
Course code:
1113FTISTS
Semester:
1E SEM
Sequentiality:
The student has passed 3-Theory of Strength and Stability (1105FTISTS)
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
- Uwe Muehlich
- Georgios Pipintakos
6-Bachelor's Project Construction
Course code:
1023FTIBPC
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1083FTIWTP or 1089FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Construction
Course code:
9951FTIBCP
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
I-Acoustics
Course code:
2116FTIACO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
I-Design of Steel and Wood Structures
Course code:
2107FTIDSW
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
- Uwe Muehlich
- Georgios Pipintakos
I-Finite Elements
Course code:
2104FTIFIN
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
- Uwe Muehlich
- Ben Moins
- Georgios Pipintakos
I-Materials Modelling in Road Engineering
Course code:
2105FTIMMR
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Construction
Lecturer(s):
- Uwe Muehlich
II-Stability
Course code:
2108FTISTA
Semester:
2E SEM
Contact hours:
16
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Construction
Lecturer(s):
- Cedric Vuye
- Amaryllis Audenaert
- Serge Vandemeulebroecke
II-Master's Project Construction including Internship
Course code:
2100FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Construction
Lecturer(s):
Courses Biochemistry
I-Industrial Biotechnology
Course code:
2007FTIIBT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Gene Technology
Course code:
2011FTIGTE
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Jan Dries
- Thomas Dobbeleers
- Ruben Verstraete
I-Project Industrial biotechnology
Course code:
9904FTIKOO
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Nikolett Wittner
II-Project Industrial Biotechnology
Course code:
2004FTIKOO
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Waut Broos
- Nikolett Wittner
II-Advanced Waste Water Engineering
Course code:
2005FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an even year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Powder and Colloid Technology
Course code:
2011FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an odd year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Electrochemical Engineering
Course code:
2013FTIECE
Semester:
2E SEM
Sequentiality:
The student has passed I-Electrochemistry, Corrosion (2003FTIELC) or must enroll for I-Electrochemistry, Corrosion (2003FTIELC)
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Master's Project Biochemistry including Internship
Course code:
2000FTIMPB
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Biochemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses Chemistry
4-Organic Chemistry
Course code:
1709FTIORG
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
4-Scientific Project Chemistry
Course code:
1086FTISCP
Semester:
2E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
5-Organic Chemistry
Course code:
1714FTIORG
Semester:
1E SEM
Sequentiality:
The student must have been enrolled in 4-Organic Chemistry (1709FTIORG)
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
6-Design of Experiments and international Study Trip
Course code:
1722FTIDEI
Semester:
2E SEM
Contact hours:
56
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
- Iris Cornet
- Serge Tavernier
- Christophe Vande Velde
- Marina Crols
- Kristin Gysels
- Lukasz Pazdur
- Kristof Verhulst
- Marc Wijnants
- Nikolett Wittner
6-Bachelor's Project Chemistry including Internship
Course code:
1091FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Chemistry including Internship
Course code:
9949FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1017FTIWTP or 1086FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Lab Project Chemical Engineering
Course code:
2017FTIPCE
Semester:
1E SEM
Contact hours:
72
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
I-Capita Selecta
Course code:
2016FTIKOO
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Chemistry
Lecturer(s):
- Serge Tavernier
- Thomas Altantzis
II-Master's Project Chemistry including Internship
Course code:
2000FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
Contact hours:
12
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Powder and Colloid Technology
Course code:
2011FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an odd year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Electrochemical Engineering
Course code:
2013FTIECE
Semester:
2E SEM
Sequentiality:
The student has passed I-Electrochemistry, Corrosion (2003FTIELC) or must enroll for I-Electrochemistry, Corrosion (2003FTIELC)
Contact hours:
28
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Structure Determination
Course code:
2012FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Bi-annual course:
Taught in academic years starting in an even year
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Advanced Waste Water Engineering
Course code:
2005FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
II-Sustainable Material Recycling
Course code:
2018FTIKOO
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Chemistry
Lecturer(s):
Courses Electronics-ICT
4-Telecommunication 1
Course code:
1529FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Raf Catthoor
4-Scientific Project Electronics-ICT
Course code:
1088FTISCP
Semester:
2E SEM
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
5-Mobile Communication
Course code:
1520FTIMOB
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Ben Bellekens
- Noori Bni Lam
5-Digital Image Processing
Course code:
1509FTIABV
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
5-Telecommunication 2
Course code:
1530FTITLC
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Ben Bellekens
- Noori Bni Lam
6-Digital Signal Processing
Course code:
1514FTIDSP
Semester:
2E SEM
Sequentiality:
The student must have been enrolled for 4-Mathematics (1014FTIWIS) or S2-Mathematics (5002FTIWIS)
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Telecommunication 3
Course code:
1531FTITLC
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Ben Bellekens
- Noori Bni Lam
6-Distributed Systems
Course code:
1515FTIDSS
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
6-Bachelor's Project Electronics-ICT including Internship
Course code:
9950FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Luc Wante
6-Bachelor's Project Electronics-ICT including Internship
Course code:
1090FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1088FTISCP or 1084FTIWTP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
- Walter Daems
- Simon Sleutel
- Guido Van Landeghem
- Luc Wante
I-Internet of Things: Low Power Embedded Communication
Course code:
2297FTIIOT
Semester:
1E SEM
Contact hours:
96
ECTS-credits:
12 ECTS-credits
Study load (hours):
336
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Michiel Aernouts
- Rafael Berkvens
I-Electronic Systems
Course code:
2210FTIESY
Semester:
1E SEM
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Joachim Denil
- Koen Lostrie
- Marc Martens
- Izaak Van Crombrugge
I-Cyber-Physical Systems
Course code:
2215FTICPS
Semester:
1E SEM
Contact hours:
90
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
II-Communication Systems
Course code:
2203FTICOS
Semester:
2E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Noori Bni Lam
II-Cyber-Physical Systems
Course code:
2214FTICPS
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Software Engineering
Course code:
2211FTISOE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics
Course code:
9964FTIMAP
Semester:
1E/2E SEM
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
No contract restriction
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electronics
Lecturer(s):
II-Master's Project Electronics including Internship
Course code:
2200FTIMPR
Semester:
2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
ECTS-credits:
15 ECTS-credits
Study load (hours):
420
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electronics
Lecturer(s):
- Maarten Weyn
- Peter Hellinckx
- Luc Wante
Courses Electromechanics
Vision
Course code:
9952FTIVIS
Semester:
2E SEM
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Transfer credit courses
Lecturer(s):
4-Scientific Project Electromechanics
Course code:
1087FTISCP
Semester:
2E SEM
Contact hours:
50
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Engineering Sciences
Lecturer(s):
- Christophe Vande Velde
- Marc Martens
- Dorine Wambeke
6-Bachelor's Project Electromechanics including Internship
Course code:
9948FTIBCP
Semester:
1E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
6-Bachelor's Project Electromechanics including Internship
Course code:
1092FTIBCP
Semester:
2E SEM
Sequentiality:
to subscribe, you need to be able to graduate AND you must have passed 4-Scientific Project (1085FTIWTP or 1087FTISCP)
Contact hours:
96
ECTS-credits:
9 ECTS-credits
Study load (hours):
252
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Credit required to obtain degree:
Yes
Study domain:
Engineering Sciences
Lecturer(s):
I-Vehicle Dynamics
Course code:
2317FTIVDY
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Internal Combustion Engineering
Course code:
2318FTIICE
Semester:
1E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
I-Model-Based Systems Engineering
Course code:
2213FTIMBS
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st semester
Study domain:
Electronics
Lecturer(s):
- Joachim Denil
- Koen Lostrie
- Marc Martens
- Izaak Van Crombrugge
II-Automotive Engineering
Course code:
2307FTIMAE
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Raf Catthoor
II-Automotive Embedded systems
Course code:
2308FTIMAE
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
- Paul De Meulenaere
- Cosmin Copot
II-Master's Project Electromechanics including Internship
Course code:
2326FTIMPR
Semester:
1E/2E SEM
Sequentiality:
Enrollment for the master is not possible if you are also enrolled in a bachelor or preparatory or bridging programme.
ECTS-credits:
21 ECTS-credits
Study load (hours):
588
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
English
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):